The Stovebolt Site Forums The Shop Area General Truck Talk Welding question

Labor Day

Labor Day

Putting down your wrenches or time for
MORE wrenching?
Wrenching this Labor Day

Plenty of places to share.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

4 members (Cosmo, Woodcmiami, cmayna, Wickedbass), 34 guests, and 2 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,009

Posts1,055,297

Members48,419

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: Welding question #202168 03/01/2006 5:12 AM
Joined: Feb 2005 Posts: 338 Oswego, New York B Bill Schickling Shop Shark
Bill Schickling Shop Shark B Joined: Feb 2005 Posts: 338 Oswego, New York	Well, I decided to rivet them on. I picked up some rivets and a rivet tool to round over the end of the rivet. I will take some pictures and put a link on here when I finish. Bill Schickling Bill Schickling 1940 1/2 ton, 1940 3/4 ton My web page

Entire Thread
Subject	Posted By	Posted
Welding question	Bill Schickling	02/25/2006 5:24 AM
Re: Welding question	Kimberly McDowall	02/25/2006 5:45 AM
Re: Welding question	Jed	02/25/2006 7:08 AM
Re: Welding question	ttodd	02/25/2006 11:18 AM
Re: Welding question	Oldtmy 48	02/25/2006 2:48 PM
Re: Welding question	64fleetside	02/25/2006 3:28 PM
Re: Welding question	Bill Schickling	02/25/2006 4:01 PM
Re: Welding question	Pakrat48	02/25/2006 4:02 PM
Re: Welding question	mugsy	02/25/2006 4:23 PM
Re: Welding question	buzztrader	02/25/2006 5:05 PM
Re: Welding question	Cletis	02/25/2006 6:08 PM
Re: Welding question	truckernix	02/25/2006 8:56 PM
Re: Welding question	Bill Schickling	03/01/2006 5:12 AM
Re: Welding question	Bill Schickling	03/05/2006 4:03 AM
Re: Welding question	Bob Wade	03/05/2006 4:24 AM
Re: Welding question	truckernix	03/05/2006 11:56 AM
Re: Welding question	Bill Schickling	03/09/2006 4:35 AM

Moderated by Gdads51

Hop To

Link Copied to Clipboard