| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,165 Posts1,057,087 Members48,463 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#18389 01/14/2002 7:10 PM | Joined: Feb 2000 Posts: 587 'Bolter | | 'Bolter Joined: Feb 2000 Posts: 587 | Go to a bearing shop with your dimensions and they may be able to look one up from that. I think your shaft is common 3/4" for center hole and measure housing ID for outer ID of bearing. I use Bearings Inc, here which has new name of Industrial ***** something now. You will probably have to slot the housing and pull tight with a clamp to hold it in place. Shouldn't need to be real heavy. Fords used a nylon thing in ends of theirs in 70's, that used to fall out after cab brackets went bad and cab fell on steering column! Don't know if they have similar dimensions or not. Try a bearing shop.
G.L. Grumpy's
Old Iron Ranch
Huntington, IN 46750
MM R tractor, Speedex
and Power King tractors
| | |
|
|
| |
