| |
Click on image for the lowdown. 
====
| | |
11 members (Cheapskate1229, Otto Skorzeny, 68ironhead, baldeagle, JW51, 3B, Jamesrsimone, Joe H, Johnny Rib, 2-Ton, 1955 1 Series),
94
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,038 Posts1,055,471 Members48,424 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Feb 2000 Posts: 5,195 'Bolter | | 'Bolter Joined: Feb 2000 Posts: 5,195 | Here are a few tips I ran found worked for me. Use a drill or drill press and spin the new ball ends, then using valve lapping compound, hold the sockets to the ball with finger pressure only. This will knock off the edges and help seat the sockets to the ball. Mine were made in China so they weren't the best fit to each other. I also had to cut the threads part way off the front draglink ball ends due to clearance with the axle. I just heated up the remaining threads and peaned them in like the originals were. This was on a '37 so yours may have more room, but check to make sure! Joe | | |
|
|
| |
