Here is what a really bad lifter looks like. These were new 200 before this picture was taken. I assembled the motor for a local guy, 400 Pontiac. The heads were complete and fresh, the rest of the engine was a total rebuild, new everything. I broke it in with Penn-Grade 30w break-in oil and drove it about 50 miles. The owner took it and drove some more, then changed oil just before the 200 mile mark. He put in Walmart brand 10-30 he had laying around. He started it up and it ran for about 15 minutes before it started missing, then it got real bad a few minutes later. It was towed back to me with no explanation on what happened. I found the bad cam and lifters, missing pushrods were in the oil pan. The oil didn't protect the cam so was eaten alive. The real issue was the super heavy valve springs the shop installed thinking it was race motor, I about bent the compressor getting them off. The Penn-Grade oil had the additives for the lifters and cam, not sure how long it would have lasted if he had installed more oil made for flat tappet engines, but I do know, it didn't like Walmart oil.
Attachments
DSCN1354.JPG (208.09 KB, 28 downloads)
all five started out the same size
DSCN1353.JPG (234.94 KB, 27 downloads)
one stopped spinning
DSCN1355.JPG (209.4 KB, 28 downloads)
all have less the 200 miles since new