Thanks to all involved with suggesting and moving my thread to DITY. I am honored and happy to be here

Tuesday was another momentous day for me and the Grumman.

Four + years ago, I took the heater core and blower out, and removed the internal defroster vent and heater boxes because everything needed to be repaired and/or cleaned and painted. I kept them out all this time because it made fixing everything in the engine bay and running new wiring much easier.

I had the heater core repaired thanks to Mr. Louie Lamb in Los Lunas! He's the only radiator rebuolder I know around here. A lost art. When he repaired the heater core, he removed the non functioning bleed and said they tend to leak, so he soldered a penny y over the hole.

I then brazed the various cracks, and brazed new tabs on the heater boxes and heater core mount, then painted the defroster vent , heater core and mount, and fan with high heat flat black, and the heater boxes with gold metal flake paint. Also, I used some rubber pipe wrap to fill in the gaps around the perimeter of the heater core. I had wondered what to use, and this seemed a good choice as it is flexible enough to compress and shove into tight spaces, will expand into the larger spaces, and it's rated for a bit over 210+ degrees Fahrenheit.

The reason it was momentous is because I had decided not to reinstall everything until I got the Grumman set up, and running right. Yesterday was install day, which means it's set up and running right!!!! Can you tell that that makes me happy?

A HUGE thank you to my bud Brad for coming over that night to help me with the install! I couldn't have done it without his help. We were working in the dark, with flashlights. It is a two person job as someone has to support the heater core and insert the mounting bolts from the cabin side, while a second person is needed to install and tighten the nuts from the front of the vehicle, through the access door.

There was a moment of synchronicity in all this for me. When I reinstalled the badge on the heater box, I saw that the body was made in Athens, NY. That's funny in a couple of ways. First, I used to live in Athens, Greece, and when I retire in a few years I plan on moving back and bringing the Grumman with me. Second, I'm originally from NY. So, it seems the Grumman combines two major points of my life. No wonder I feel so connected to it. 😀

That's it for this installment. Next, I'll be buying the appropriate hoses to plumb the heater core, a manual shut off valve to put inline with the feed line of the heater core, a HVAC hose to connect the defroster vent to the defroster heater box, and I need a new radiator top hose that is not corrugated so that I can install a fitting inline that has a temperature switch to turn on the radiator fan automatically. I currently only have a manual switch on the dash that I physically have to turn on and off.

Thanks for reading!
Attachments
IMG_20261117_131004103_HDR.jpg (477.84 KB, 5 downloads)
Heater core, fan, shroud pre-assembly
IMG_20261117_131010291_HDR.jpg (458 KB, 4 downloads)
Lucky penny
IMG_20261117_131021324_HDR.jpg (257.94 KB, 4 downloads)
Material used to pack around heater core
IMG_20261117_131025081_HDR.jpg (373.26 KB, 5 downloads)
Material used to pack around heater core
IMG_20261118_090058701_HDR.jpg (175.2 KB, 5 downloads)
Heater core installed
IMG_20261118_090149183_HDR.jpg (319.55 KB, 5 downloads)
Defrost vent
IMG_20261118_090317762_HDR.jpg (316.08 KB, 5 downloads)
Defrost and heater boxes installed
IMG_20261118_090209760_HDR.jpg (487.08 KB, 5 downloads)
Heater box door open
IMG_20261118_090258765_HDR.jpg (369.76 KB, 5 downloads)
Made in Athens


~~ Konstantine
1962 Grumman Olson Kurbside/Chevy P30
Follow in the DITY