For Mark ...

Making progress on the next project for Peggy. The mortising tool is getting a real workout on this one. 1st real project for the old Rockwell lathe and the new Laguna table saw smile It's a shaker-style "Occasional Table."
Attachments
20250617_192031.jpg (245.08 KB, 226 downloads)
Found it in a book I have
20250617_172206.jpg (232.11 KB, 226 downloads)
Turning the legs
20250619_175934.jpg (264.02 KB, 226 downloads)
Planing the side boards. The red oak is from that same tree Hambone and I harvested years ago.
20250619_201710.jpg (304.97 KB, 226 downloads)
Cutting tenons on the new Laguna table saw. :) Doing it this way was faster and easier than fooling with the dado saw blades...
20250625_155031.jpg (207.22 KB, 227 downloads)
Cutting the mortises. That tool just keeps coming in handy!
20250625_213700.jpg (305.17 KB, 225 downloads)
1st trial assembly! It came out right! Ready for final fitment and gluing. I'll start on the drawers after that.

~ John

A kid raised on Hotwheels, Matchbox and Tonka cannot be reasonably expected to own only one vehicle as an adult.

1949 Chevrolet 3804
In the Legacy Gallery | In the Gallery Forum
1973 IH 1310 Dump
1963 Kaiser M38A1
2001 International/AmTran RE3000 "Skoolie"
2014 Ford E-350 4x4 (Quigley)