Measurements are about one inch lower on the driver side. I'll start scraping old gunk off so I can see it better.
I can't get to the inside can part to see the bolt there.
Attachments
IMG_8216.jpeg (185.29 KB, 118 downloads)
IMG_8218.jpeg (326.05 KB, 116 downloads)
IMG_8217.jpeg (171.33 KB, 117 downloads)

Last edited by klhansen; 06/11/2025 6:17 AM. Reason: removed weird characters
1953 Chevy 153A 3/4-ton
Working on my project since 2015
Follow along in my DITY