I’m putting together a 4x4 from parts I already have. 400 sbc th350 with np203 transfer case. All bolted into a 87 blazer frame.
I know the transfer case needs some type of additional support besides the cross member that holds the adapter to the th350.
I’m thinking of building a support of the passengers side. Using the two bolt holes in the case for the mount.and using bushings to some sort of frame mount.I been looking on line for ideas with no luck. Trying not to re invent the wheel. Any input is appreciated.
Last edited by goneagain; 08/30/2023 3:55 PM.
