| |
Click on image for the lowdown. 
====
|
| | Forums66 Topics128,051 Posts1,055,735 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
|
| THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
|
| 
#15147 02/05/2002 5:26 AM | Joined: Feb 2001 Posts: 41 Member | | Member Joined: Feb 2001 Posts: 41 | I'm dealing with one of the threaded shackle pins on the back end of my rear leaf springs (on a '57). The other three pins screwed out smoothe as silk. A stiff breeze could have unscrewed them. The fourth, however (left side that screws into the hangar itself) will not budge.
On the third application of heat I finally got it to break free slightly, but it will only move about 5 degrees--no further. I'm wondering if anyone else has had this much trouble with a threaded shackle pin, and if there are any tricks to getting them out?
Thanks,
Ed | | |
|
|
| |
