| |
Labor Day Putting down your wrenches or time for
MORE wrenching? 
Plenty of places to share. | | Click on image for the lowdown. 
====
| | |
1 members (baldeagle),
31
guests, and
0
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,003 Posts1,055,244 Members48,418 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jan 2014 Posts: 3,677 'Bolter | | 'Bolter Joined: Jan 2014 Posts: 3,677 | I think it’s more likely that you have some poor grounds out back. Not sure what exactly you have for rear fixtures, but the original type are grounded through the housing, and then what ever the housing is mounted to. Simply unbolting things and scrubbing to bare metal might make it all fine.
I got sick of chasing ground issues and added some of my own. Put a self tapper in the bracket between the stop and tail bulb that holds down a dedicated ground wire that runs to the frame. Also added a wire from the frame to the bumper (my bumper is a farmer-made thing that also supports the lights.
You have a 12v test light? Pretty easy to confirm or debunk the bad ground theory with one. Feed it with 12v, start poking around on the path that ~should- be grounding your lamp housings.
1951 3100
| | |
|
|
| |
