I took the Rochester Monojet off my 261 before having some engine work done. The carb sat for quite a while untouched. I put the carb back on as is since the carb was working just fine before the engine work (I know, I know.)

I think I lost what might have been a little piece that clamps on the cable sheath. So, is there a little clamping piece that should be attached to the hole with the arrow pointing to it in the pic?

If so, are those little pieces available?

I tried to use a zip tie but that doesn't work.

Thanks!
Attachments
Monojet Throttle Cable Attachment.jpg (57.29 KB, 133 downloads)

1948 3/4-Ton 5-Window Flatbed Chevrolet

34 Years. Now with a '61 261, 848 head, Rochester Monojet carb, SM420 4-speed, 4.10 rear, dual reservoir MC, Bendix up front, 235/85R16 tires, 12-volt w/alternator, electric wipers and a modern radio in the glove box.