Originally Posted by showkey
1/2 T 50’ GMC witha severe camber issue on both sides………..built a fixture and 20 ton bottle Jack.
Bent the cold axle back to 0 camber.

If your in spec I would not change due to tire choice. I ran radials on the 1/2t in the photos.
Are you sure you didn't install the spindles upside down? I did that on one of mine when redoing kingpins till I eyeballed it and said OOPS!
Attachments
IMG_3931.JPG (348.23 KB, 137 downloads)
IMG_3932.JPG (375.92 KB, 135 downloads)

Kevin
1951 Chevy 3100 work truck
Follow this saga in Project Journal
Photos
1929 Ford pickup restored from the ground up. | 1929 Ford Special Coupe (First car)
Busting rust since the mid-60's
If you're smart enough to take it apart, you darn well better be smart enough to put it back together.