The Stovebolt Site Forums The Shop Area Driveline Camber (bias ply vs radial)

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

3 members (GRNHydra, Rusty Heaps, Gray_Ghost), 150 guests, and 3 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,164

Posts1,056,967

Members48,458

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: Camber (bias ply vs radial) bztguy #1441959 02/21/2022 4:53 AM
Joined: Jul 2000 Posts: 2,201 Mill Bay, BC, Canada Gord&Fran Insomniac
Gord&Fran Insomniac Joined: Jul 2000 Posts: 2,201 Mill Bay, BC, Canada	My radial tires look OK after about 1000 miles. I didn't bend the axle for camber so it's still the 1954 spec. I bought the skinniest tires I could get; I believe camber would affect wider tires more. I also added an anti-roll bar. Gord 🇨🇦 ---- 1954 1/2 ton 235 4 speed

Entire Thread
Subject	Posted By	Posted
Camber (bias ply vs radial)	bztguy	02/19/2022 8:50 PM
Re: Camber (bias ply vs radial)	Wrenchbender Ret.	02/20/2022 3:44 AM
Re: Camber (bias ply vs radial)	Bill Hanlon	02/20/2022 4:48 AM
Re: Camber (bias ply vs radial)	DaveV	02/20/2022 1:15 PM
Re: Camber (bias ply vs radial)	52Carl	02/20/2022 11:58 PM
Re: Camber (bias ply vs radial)	tclederman	02/21/2022 12:15 AM
Re: Camber (bias ply vs radial)	Bill Hanlon	02/21/2022 12:45 AM
Re: Camber (bias ply vs radial)	fixite7	03/01/2022 1:21 PM
Re: Camber (bias ply vs radial)	Justhorsenround	02/21/2022 1:10 AM
Re: Camber (bias ply vs radial)	bztguy	02/21/2022 2:52 AM
Re: Camber (bias ply vs radial)	showkey	02/21/2022 3:25 AM
Re: Camber (bias ply vs radial)	klhansen	02/21/2022 4:44 AM
Re: Camber (bias ply vs radial)	showkey	02/21/2022 7:56 PM
Re: Camber (bias ply vs radial)	klhansen	02/21/2022 8:00 PM
Re: Camber (bias ply vs radial)	showkey	02/22/2022 3:01 AM
Re: Camber (bias ply vs radial)	bztguy	02/21/2022 3:44 AM
Re: Camber (bias ply vs radial)	Gord&Fran	02/21/2022 4:53 AM
Re: Camber (bias ply vs radial)	bztguy	02/21/2022 7:29 PM
Re: Camber (bias ply vs radial)	Bill Hanlon	02/22/2022 3:52 AM
Re: Camber (bias ply vs radial)	bztguy	02/22/2022 4:13 AM
Re: Camber (bias ply vs radial)	Bill Hanlon	02/22/2022 3:04 PM
Re: Camber (bias ply vs radial)	bztguy	02/22/2022 9:45 PM
Re: Camber (bias ply vs radial)	Bill Hanlon	02/23/2022 1:36 AM
Re: Camber (bias ply vs radial)	52Carl	03/02/2022 1:10 AM

Moderated by Dusty53, SWEET

Hop To

Link Copied to Clipboard