| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,078 Posts1,055,935 Members48,430 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Nov 2018 Posts: 122 'Bolter | | 'Bolter Joined: Nov 2018 Posts: 122 | Mike - like you described, I drilled 1/8" holes in the center of the track about 3" apart and plug welded it to the inner cowl panel. I then ground the weld so as to not interfere with the rubber installation. It worked out well for me. Just make sure to use a low heat setting on your welder so you don't blow through the track. They are not very thick. Good luck!!
Charlie
'51 3100 5-Window (Restomod in progress)
| | |
|
|
| |
