If you haven't bought the parts, the parts list may be wrong.
73-87 lower ball joint.
60-66 upper.
I'd try to steer you away from CPP, but maybe they have gotten better.
73-87 outer tie rods
60-66 inner tie rods
stock adjuster sleeves
stock upper and lower control arms
I have done this swap with items listed above, while using the stock cross member. Not sure if your parts list will work completely, but if you're swapping everything, it may. There are different approaches. I tried to go the easy route with a kit. But the kit I bought, well, let's just say that I had to replace 90% of the parts because they were ****. In essence I only used the spindles, calipers, and pads from the kit. Everything else I used was bought new or reused from my truck.
