| |
Click on image for the lowdown. 
====
| | |
0 members (),
108
guests, and
0
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,115 Posts1,056,292 Members48,439 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jan 2004 Posts: 16 Wrench Fetcher | | Wrench Fetcher Joined: Jan 2004 Posts: 16 | 1/2 inch clearance is plenty; as long as air flows around the trans you'll be ok. | | | |
Entire Thread
|  
Cut,Grind,Weld,,,and Measure!
| burntclutch | 09/29/2006 4:58 PM | |
Re: Cut,Grind,Weld,,,and Measure!
| knigtrider | 09/30/2006 1:42 AM | |
Re: Cut,Grind,Weld,,,and Measure!
| burntclutch | 10/01/2006 7:35 PM | |
Re: Cut,Grind,Weld,,,and Measure!
| mfrazier01 | 10/07/2006 4:39 AM | |
Re: Cut,Grind,Weld,,,and Measure!
| acmegarage | 01/06/2007 5:52 PM | |
|
|
| |
