| |
Click on image for the lowdown. 
====
| | |
8 members (SNOYL, Southerntruck, Phoneman, wilbur53, 1955 1 Series, SmalltownTRKGuy, Jon G, ShopRag),
155
guests, and
4
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,209 Posts1,057,461 Members48,471 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Oct 2005 Posts: 4,261 "Hey! I sound like Darth Vader!! | | "Hey! I sound like Darth Vader!! Joined: Oct 2005 Posts: 4,261 | Chevy is the make! I used the original tank. Welded up some pinholes. Then I used the Eastwood kit to clean it out and seal it. Then I used some of their tank / zinc paint for the outside.
Made my own bulkhead plates for the fuel pump assembly. Cannibalized some parts from a GM in-tank pump unit. Mostly the bottom plate that the in-tank pump sits on.
3/8" tubing on the pressure side, 5/16" tubing on the return side. -6 and -5, JIC fittings. Except for the fuel filter which has the o-ring fittings.
Most all the parts came from McMaster except the JIC bulkhead fittings and the -5 stuff. That came from a hose specialty store. The tubing isn't as straight as I would have liked it as it came from McMaster in a coil. | | |
|
|
| |
