| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,095 Posts1,056,479 Members48,444 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#13489 02/16/2004 5:27 PM | Joined: Jun 2000 Posts: 2,773 'Bolter | | 'Bolter Joined: Jun 2000 Posts: 2,773 | You can't get a torque wrench on those bolts. I do them by feel. Easiest thing is to practice on one of the bolts that is accessible, torque it down to the value needed for the interior bolt, the grab your end wrench and turn the bolt slightly. It might take a few times, but you can get pretty close that way.
If the manifold bolts are stubborn, soak them overnight with a good penetrating oil, I recommend Kroil or PB Blaster. Then warm the engine up and put on some gloves to remove the bolts.
Fred
52 3600
69 C-10
| | |
|
|
| |
