| |
Click on image for the lowdown. 
====
| | |
3 members (GIJOE298, Peggy M, 1 invisible),
123
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,078 Posts1,056,056 Members48,433 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Mar 2006 Posts: 76 Wrench Fetcher | | Wrench Fetcher Joined: Mar 2006 Posts: 76 | When I did this conversion on my '50 with a 261 I used the stock flywheel and simply bought an 11 inch pressure plate/disc set up with 26 splines. The 11 inch pp is a tight fit with the stock bell housing but it will work. If your flywheel is drilled for a 10.4 pp that should be plenty strong enough and a less tight fit. I went with the 11 inch since my engine was warmed over and we use it for some drag racing. I'm not familiar with the 14 spline set up. The only other mod I had to make was to enlarge the 4 mounting holes in the trans case every so slightly to a full 1/2 inch hole. With that they lined right up with the bell housing bolted right up. | | |
|
|
| |
