Hello,

I am new to this old stuff and cant seem to find much info on it. I have a 36 chevy pickup and trying to get it going. The first problem is identifying the transmission. I took the cover off and seems there was water sitting in there for some time and the larger gear in front is half chewed off. I have an SM420 trans (with open driveline yoke?) and a little 3 spd trans with the enclosed rear section, but no top. I have attached pictures of the trans and also the sm420 and the 3 spd

I wouldn't mind going with a different setup if I have too, but the pedal bracket bolts straight to the trans and bell housing. I do not want to change out the driveshaft.

Any help would be appreciated

Greg
Attachments
IMG_2810[1].JPG (293.13 KB, 165 downloads)
IMG_2815[1].JPG (431.34 KB, 169 downloads)
IMG_2830[1].JPG (285.44 KB, 166 downloads)
IMG_2820[1].JPG (216.91 KB, 163 downloads)
IMG_2811[1].JPG (304.97 KB, 159 downloads)

Last edited by Justhorsenround; 02/25/2019 12:38 AM. Reason: Removed wanted to buy reference