| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,205 Posts1,057,429 Members48,471 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Aug 2018 Posts: 46 Wrench Fetcher | | Wrench Fetcher Joined: Aug 2018 Posts: 46 | I'm in the middle of installing my complete new brake kit on my 51 style GMC half ton. Everything is bolted in the front brakes went on perfectly with no issues however in my rear brakes it seems that there is not enough room in the wheel cylinders themselves to compress far enough to allow the shoes to go on completely. I have everything put together and I'm 99.9% sure it is put together correctly. However one shoe is always off the top Center pivot point and when it gets pushed back down on the other side lifts up off and the wheel cylinder link pins move.
The feeder screw is open and the master is disconnected.
Any ideas?
1950 GMC 1/2 Ton Long Box
228-Zenith carb- SM420-bendix brakes
| | |
|
|
| |
