OK, So "Hoss" FINALLY got delivered today. Here is the information I have after a quick lookover (not in order)
(1) Both doors will need lower patch panels (2) All glass and at least the windshields molding will need replaced (3) I need to invest in PB Blaster (4) I need a cutoff wheel attachment for my die grinder (the passenger side hood is tack welded shut) (5) There is a bit more rust than I thought but still not too bad (6) The frame has been cut and welded about 1/2 way back from the cab to the differential (looks like good work though) (7) The numbers on the secondary transmission (or whatever it is) are SCC C3C - 15 as best as I can tell (8) The numbers on the primary transmission are GBT 7222 (9) The numbers on the differential are (these may be partial) 5.64.1 8 then below that 6.36 3R2K37 as best I can tell (10) This appears to be a 2 speed differential (11) There are 6 hub bolts (12) The shifter closest to the driver's door has 1-N-2 with R to the left and down and on the right has 3-4 (this appears to go to the differential) (13) The far right shifter has a small lever just below the knob (14) The middle shifter seems to have 2 positions forward (toward the engine) and back (toward the seat) (15) The wiper system needs a lot of attention (16) New window regulators and door handles are in order (17) The shifter that appears to be attached to the differential seems to be stuck (not sure if it is the linkage, cable or internal to the differential)
I have attached the 5 pics I am allowed any input would be greatly appreciated as to what I actually have here
Any thoughts on the value of this truck in this condition would be nice. It is supposed to run but lets assume it does not
Last edited by TodS; 05/01/201810:32 PM. Reason: Corrected punctuation
