The Stovebolt Site Forums The Shop Area Engine Shop Vacuum at the manifold

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

7 members (Gdads51, FAST55, Gray_Ghost, cmayna, tclederman, sron48, Hambone), 108 guests, and 0 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,111

Posts1,056,258

Members48,437

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: Vacuum at the manifold Sulli #1255178 02/16/2018 3:41 AM
Joined: Jun 2004 Posts: 8,597 Overland Park, Ks. W Wrenchbender Ret. Riding in the Passing Lane
Wrenchbender Ret. Riding in the Passing Lane W Joined: Jun 2004 Posts: 8,597 Overland Park, Ks.	I agree. .052 is too small for a 235. They generally run .055 to .058. I had to drill one out too .062 one time to get it to run right. If your throat is warped you better make sure you get vacuum to the power piston. I would try the .056 jet. I bet it will run much better. They say money can't buy happiness. It can buy old Chevy trucks though. Same thing. 1972 Chevy c10 Cheyenne Super In the Gallery Forum

Entire Thread
Subject	Posted By	Posted
Vacuum at the manifold	Sulli	02/05/2018 12:53 AM
Re: Vacuum at the manifold	Hotrod Lincoln	02/05/2018 1:13 AM
Re: Vacuum at the manifold	Sulli	02/05/2018 2:01 AM
Re: Vacuum at the manifold	Hotrod Lincoln	02/05/2018 2:29 AM
Re: Vacuum at the manifold	coilover	02/05/2018 2:49 AM
Re: Vacuum at the manifold	Sulli	02/05/2018 4:49 AM
Re: Vacuum at the manifold	Hotrod Lincoln	02/05/2018 2:45 PM
Re: Vacuum at the manifold	Wrenchbender Ret.	02/05/2018 3:12 PM
Re: Vacuum at the manifold	Joe H	02/05/2018 4:21 PM
Re: Vacuum at the manifold	Sulli	02/06/2018 3:35 AM
Re: Vacuum at the manifold	Sulli	02/16/2018 1:30 AM
Re: Vacuum at the manifold	Hotrod Lincoln	02/16/2018 1:51 AM
Re: Vacuum at the manifold	Sulli	02/16/2018 3:27 AM
Re: Vacuum at the manifold	Hotrod Lincoln	02/16/2018 3:36 AM
Re: Vacuum at the manifold	Wrenchbender Ret.	02/16/2018 3:41 AM
Re: Vacuum at the manifold	Dragsix	02/16/2018 4:09 AM
Re: Vacuum at the manifold	Hotrod Lincoln	02/16/2018 4:20 AM
Re: Vacuum at the manifold	tclederman	02/16/2018 2:08 PM
Re: Vacuum at the manifold	52Carl	02/17/2018 1:15 AM
Re: Vacuum at the manifold	Sulli	02/18/2018 10:25 PM
Re: Vacuum at the manifold	Sulli	02/19/2018 1:23 AM
Re: Vacuum at the manifold	Hotrod Lincoln	02/19/2018 3:43 AM
Re: Vacuum at the manifold	Sulli	03/10/2018 9:27 PM
Re: Vacuum at the manifold	Dragsix	03/10/2018 10:09 PM
Re: Vacuum at the manifold	Sulli	03/20/2018 1:00 AM

Moderated by Phak1, Woogeroo

Hop To

Link Copied to Clipboard