| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,108 Posts1,056,238 Members48,437 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Mar 2011 Posts: 1,146 Shop Shark | | Shop Shark Joined: Mar 2011 Posts: 1,146 | You don't have to remove the fuel pump to replace the metal fuel line.
If you remove the fuel pump you might have to put in a new fuel pump gasket.
So you're better off not removing the fuel pump.
Just make sure you don't cross the threads when screwing on the metal fuel line.
When you start to thread on the pipe fitting nut into the fuel pump port, and it starts turning hard, that will tell you the threads are crossed.
The pipe fitting nut should turn fairly easy until it bottoms out.
You may have to bend the pipe slightly to get the pipe fitting nut threads to line up with the fuel pump port threads.
| | |
|
|
| |
