| |
Labor Day Putting down your wrenches or time for
MORE wrenching? 
Plenty of places to share. | | Click on image for the lowdown. 
====
| | |
8 members (Otto Skorzeny, EchoBravoSierra, baldeagle, Jon G, Jeff Ogden, 78buckshot, greenie-reddy, RonG),
32
guests, and
5
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,005 Posts1,055,266 Members48,418 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Mar 2005 Posts: 1,513 'Bolter | | 'Bolter Joined: Mar 2005 Posts: 1,513 | The one piece floor/toeboards don't go all the way up to the corner of the firewall...They're about 3 inches short at the top. If the rot is lower than that you can get away with them. I used them and was happy with the results. I put 3/4" angle iron strips along the floor opening and lap welded the new and old toeboards at the rib for extra strength. Don't forget to brace it. Here's a pic: http://community.webshots.com/photo/377692314/1377796177023244788bkOvBW Curt B.
1952 1300 Canadian 1/2 ton restomod You Tube | | |
|
|
| |
