| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,150 Posts1,056,821 Members48,456 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2007 Posts: 1,038 'Bolter | | 'Bolter Joined: Apr 2007 Posts: 1,038 | Justin,
My '37 half ton project came with a 4 spd in it, an option for that year. You can make it work with the correct u joint assembly.
My '42 half ton has the same 4 spd in it and I blew the u joint, tearing up the yoke that attaches to the output shaft of the tranny. I had a heck of a time finding a u joint assembly for that application and during the process inadvertently bought a u joint that fit the 3 spd. The out put shafts are different as the 4 spd has a larger beefier diameter. I am guessing it will be the same for your situation.
Look at Keith Hardy's Old Chevy Manual site, find the correct u joint part number and keep checking Ebay or your other sources for old parts. I think you will find one eventually.
Kent | | |
|
|
| |
