| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,095 Posts1,056,480 Members48,444 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Aug 2010 Posts: 775 'Bolter | | 'Bolter Joined: Aug 2010 Posts: 775 | I can,t remember. Are there two threaded holes in the steering wheel near the shaft? If so you use a steering wheel puller. A cross bar with three bolts. Two thread into the steering wheel the third is threaded through the cross bar and tightened until it pops the wheel loose. If not have a friend pull up on the wheel while you give the center shaft a good wrap with a hammer. Leave the nut on at the top of the threads to protect the threads. | | |
|
|
| |
