The Stovebolt Site Forums The Parking Lot Big Bolts 1954 GMC Master Cylinder Slop

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

0 members (), 82 guests, and 2 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,090

Posts1,056,378

Members48,442

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: 1954 GMC Master Cylinder Slop AdamK1500 #1167558 05/31/2016 1:50 AM
Joined: Apr 2016 Posts: 96 South Dakota A AdamK1500 Shop Shark
AdamK1500 Shop Shark A Joined: Apr 2016 Posts: 96 South Dakota	I pulled it apart and I definitely need to rebuild, the slop was caused by rust in the cylinder that stoped the piston from fully retracting. The piston is labled 1-1/8 but my manual says it should have a 1-1/4. Will the smaller bore be sufficient? 1954 GMC 350-27

Entire Thread
Subject	Posted By	Posted
1954 GMC Master Cylinder Slop	AdamK1500	05/30/2016 7:40 PM
Re: 1954 GMC Master Cylinder Slop	Mike B	05/31/2016 1:19 AM
Re: 1954 GMC Master Cylinder Slop	AdamK1500	05/31/2016 1:50 AM
Re: 1954 GMC Master Cylinder Slop	kb3csw	05/31/2016 2:14 AM
Re: 1954 GMC Master Cylinder Slop	Mike B	05/31/2016 2:25 AM
Re: 1954 GMC Master Cylinder Slop	AdamK1500	05/31/2016 2:28 AM
Re: 1954 GMC Master Cylinder Slop	Mike B	05/31/2016 3:12 AM
Re: 1954 GMC Master Cylinder Slop	EdPruss	05/31/2016 6:17 AM
Re: 1954 GMC Master Cylinder Slop	69Cuda	05/31/2016 2:47 PM
Re: 1954 GMC Master Cylinder Slop	AdamK1500	06/01/2016 1:21 AM
Re: 1954 GMC Master Cylinder Slop	Hotrod Lincoln	06/01/2016 3:43 AM

Moderated by 69Cuda, Super55

Hop To

Link Copied to Clipboard