| |
Click on image for the lowdown. 
====
| | |
2 members (Jay R, WICruiser),
146
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,056 Posts1,055,796 Members48,426 | | Most Online14,466 Apr 26th, 2026 | | AD Chevy Trucks Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down with Ads! Again, thanks! | | | | Joined: Dec 2008 Posts: 1,922 'Bolter | | 'Bolter Joined: Dec 2008 Posts: 1,922 | a new charge would fire and be trapped
It's trapped in the same way that a normal fill is trapped, except it contributes nothing to the crank motion. The piston goes down no matter what. If both valves are closed you have... a modern drop-some-cylinders engine. | | | |
Entire Thread
|
261, bent rod?
| Denny Graham | 10/09/2015 4:39 PM |
Re: 261, bent rod?
| coilover | 10/09/2015 4:47 PM |
Re: 261, bent rod?
| Steve_H | 10/09/2015 4:49 PM |
Re: 261, bent rod?
| Hotrod Lincoln | 10/10/2015 12:45 AM |
Re: 261, bent rod?
| Denny Graham | 10/10/2015 2:05 AM |
Re: 261, bent rod?
| MtneerMike | 10/10/2015 4:35 AM |
Re: 261, bent rod?
| coilover | 10/10/2015 4:00 AM |
Re: 261, bent rod?
| panic | 10/10/2015 4:43 AM |
Re: 261, bent rod?
| Denny Graham | 10/10/2015 12:34 PM |
Re: 261, bent rod?
| jbennett | 10/10/2015 1:38 PM |
Re: 261, bent rod?
| Denny Graham | 10/10/2015 6:52 PM |
Re: 261, bent rod?
| panic | 10/10/2015 7:03 PM |
Re: 261, bent rod?
| 52Carl | 10/11/2015 2:14 AM |
Re: 261, bent rod?
| Hotrod Lincoln | 10/11/2015 5:43 AM | |
| |
| |