On a 48 3/4 ton I seem to have run into one bolt on each side that does not want to move.
The two lower bolts on the steering knuckle that attach the steering arms to the knuckle has the passenger side rear bolt and the driver side front bolt stuck in the steering arm.
Nuts all came off easy the other bolt on each side pulled out with minimal effort.
But penetrate, heat, some light beating yields nothing.
Those out there who have removed these before are they press fit? If so why just one one each side.
If they are press fit how did you get them to budge, my range of pullers can not seem to find enough to grab onto to press them out.
Shop manuals do not show any special puller, I may have to make one as a last resort.
Last edited by 48X3600; 05/28/2015 9:37 PM.
