| |
Click on image for the lowdown. 
====
| | |
10 members (Bill Hanlon, Tim Canfield, treegrower, moparguy, 3B, 55shaker, Gdads51, WICruiser, Hotrod Lincoln, greenie-reddy),
150
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,195 Posts1,057,379 Members48,469 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Nov 2006 Posts: 2,544 Shop Shark | | Shop Shark Joined: Nov 2006 Posts: 2,544 | You can probably bleed the master cylinder without taking it off. I did my '53 a month ago. Take a short brake line and bend it so the end will go into the master and connect other to the out of the master. Top off fluid and pump the pedal slowly. It's way easier than doing it in the vise and then installing it with fluid running down your arm as you bolt it up.
| | |
|
|
| |
