Wired up a 7 wire signal with mostly good results. To the original harness I added dual sockets to the front running lamps with the brighter filament hooked for turning. Cut the feed from the brake switch to rear lamps to hook to signal. Also cut the brake line at the rear and ran a separate line for the right. Everything is color connected and makes sense to me.
Issues are:
right turn = both fronts blinking
With lights on: both fronts blinking
parking lights on: front blinkers don't work. right rear stays on, left rear nothing.
Somewhat confused since nothing is hooked to the light switch with the turn signals circuit. Or why would there be circuit crossing between the brake/turn and headlight/parking circuits? I suppose a grounding issue somewhere.
