| |
Click on image for the lowdown. 
====
| | |
3 members (Otto Skorzeny, Gdads51, 1 invisible),
137
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,109 Posts1,056,266 Members48,439 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2005 Posts: 2,832 'Bolter | | 'Bolter Joined: Apr 2005 Posts: 2,832 | I have pictures of a 51 half ton with a 500 Cad I did and it looks like the right head is very close to the firewall and the left head clears by about one and a quarter inches. I had to go by firewall clearence for judging where to place the engine. If your using a recessed aftermarket firewall then maybe other measurements will work. The engine, 400 Turbo Hydramatic trans, and factory radiator all fit in without cutting the cab, floor, or core support. Run a 3.08 rear and it could have EASILY pulled one down into the 2's.
Evan
| | |
|
|
| |
