| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,203 Posts1,057,286 Members48,467 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Dec 2001 Posts: 14,522 Moderator: Welcome Centre, Southern Bolters, Legion Hall | | Moderator: Welcome Centre, Southern Bolters, Legion Hall Joined: Dec 2001 Posts: 14,522 | I believe my 37 and yours are the same? Its been years since I put my glass in but maybe this will help?
As I best remember The glass fits down in a track and yes, the glass should be centered in that track. Did you put in new glass channels? I'm not sure I understand what you mean about the gap but there should not be one around the window anywhere.
On the back window I don't remember if I put the glass in the rubber gasket and then installed or put the rubber around the opening and then put the glass in....however, once you get the rubber gasket and glass in place you should have a frame that fits around the glass on the outside. Then you have screws that go in from the inside and through the rubber gasket and screw into the outside frame. The rubber gasket may not have the holes for the screws to go through. Back in 97 my did not and I had to drill holes through the rubber gasket.
Hope this helps in some way. Pehaps someone who has recently done this will chime in. Good luck. I'll keep watch to see how you make out. If necessary I'll pull my door panel off and take a look/pictures. | | |
|
|
| |
