The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
9 - 11 Memorials

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
6 members (Gdads51, treegrower, Shade Baby, baldeagle, tclederman, DannyW), 62 guests, and 7 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,014
Posts1,055,328
Members48,419
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
#951062 06/17/2013 11:22 PM
Joined: Mar 2005
Posts: 1,636
R
'Bolter
'Bolter
R Offline
Joined: Mar 2005
Posts: 1,636
Installed a temp gauge and sensor in my 58 Chevy. Manual gauge shows engine to run pretty consistently at 180 degrees.

When I hook up my temp gauge in the dash after about tem minutes it will be pegged out. Install the old gauge and it too will eventually peg out even with the new sensor.

If the wiring from the back of the gauge to the temp sensor is bad will it make it eventually peg?

Joined: Feb 2002
Posts: 12,029
F
Cruising in the Passing Lane
Cruising in the Passing Lane
F Offline
Joined: Feb 2002
Posts: 12,029
the wire to the sender will be a "go/no go" thing, just conveying the resistance info from the sender, if you give the wire an ohmmeter check it should read near 0 ohms end to end ... are you sure you have the correct sender? no thread sealant of any type on the sender? NAPA TS6469

Bill


Moved over to the Passing Lane

"When we tug a single thing in nature, we find it attached to the rest of the world" ~ John Muir
"When we tug a single thing on an old truck, we find it falls off" ~ me
Some TF series details & TF heater pics
Joined: Mar 2005
Posts: 1,636
R
'Bolter
'Bolter
R Offline
Joined: Mar 2005
Posts: 1,636
Supposed to be correct sender. No sealant. I've read on other forums that some brands work better than others.

Joined: Feb 2002
Posts: 12,029
F
Cruising in the Passing Lane
Cruising in the Passing Lane
F Offline
Joined: Feb 2002
Posts: 12,029
never had any problem with a sender, but you can heat it in a pan of water on the stove with a thermometer, while watching the ohm reading, should move steady and not get to a max [or min] reading until the water is really boiling - if it's causing your gauge to peg at a true 180 it should show up

Bill


Moved over to the Passing Lane

"When we tug a single thing in nature, we find it attached to the rest of the world" ~ John Muir
"When we tug a single thing on an old truck, we find it falls off" ~ me
Some TF series details & TF heater pics

Moderated by  Jon G, Rusty Rod 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0