The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
Help is a click away!

VEHICLE
INFORMATION
KITS


at the

GM Heritage Center
All the details are here.

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
8 members (mvigo, Charles in CA, Rusted Nut, UtahYork, Peggy M, Shade Baby, klhansen, 1 invisible), 80 guests, and 2 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,074
Posts1,055,913
Members48,429
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
#92376 07/19/2005 3:20 PM
Joined: Mar 2005
Posts: 16
F
Junior Member
Junior Member
F Offline
Joined: Mar 2005
Posts: 16
OK guys, here's one from a newbee....I have a 56 Chev 3800 w/ 57 283ci. I'm loosing over 1/2 volt in battery overnight, with the key off. I'm an electrical idiot, so replaced battery, cables, regulator, ignition resistor, cleaned neg ground contact at firewall, and checked circuits by removing fuses, but still get a .4 volt draw when measuring between pos cable and battery. My auto shop said they could not find anything wrong with the alternator. Anybody have a solution to my problem, No, I don't want to sell the truck, I can beat this demon!! Winning suggestion wins a free trip to Sedro Wooly (just kidding). Thanks for any help...Frank

#92377 07/19/2005 3:41 PM
Joined: Apr 2000
Posts: 499
R
'Bolter
'Bolter
R Offline
Joined: Apr 2000
Posts: 499
Alternators can and often do have internal shorts and still capable of charging the bat at 14volts. The typical alt tester won't indicate a problem. Using the same setup you used when pulling fuses, take the wires off the alt.


'67 GMC 3/4 292 4spd
#92378 07/19/2005 4:09 PM
Joined: Oct 2002
Posts: 4,066
Bolter
Bolter
Joined: Oct 2002
Posts: 4,066
Had one on my 52,, never did find it,,I got me a disconnect switch, just turn it off when I am thru with it for the night,,,,,,,,,mine has a 235, with 12 volt,,,,,good luck .....Fred


Redryder pix
My Hotrod
A veteran - whether active duty, retired, national guard, or reserve - is someone who, at one point in his or her life, wrote a blank check made payable to The 'United States of America', for an amount of "up to and including my life."
I am fighting cancer and I am winning the fight | Pain is part of life; misery is an option.

#92379 07/19/2005 4:39 PM
Joined: Mar 2005
Posts: 16
F
Junior Member
Junior Member
F Offline
Joined: Mar 2005
Posts: 16
you guys are fast...thanks for responding! I think the shut off switch is a good idea and was going to do that until I can find the real problem. Also, I'm not done exploring the possibility of the alternator. How do I check it? Remember, I'm an electrical idiot!! thanks, Frank

#92380 07/19/2005 5:56 PM
Joined: Oct 2002
Posts: 4,066
Bolter
Bolter
Joined: Oct 2002
Posts: 4,066
I am not sure,my brother spent about 2 hours trying to find me and he is good at this stuff, he also suspected the alt. as last result,did something with one of the wires on it, then the truck would not die after turning off the switch, he checked my electrical wipers, radio, was surprised that he could not find it, I told him to stop as he already spent a lot of time on it,, to began with it I replace a cable that was in bad shape,ground I believe it was, thought this was the problem, then I checked the alt... it was bad, so I bought a new one, thought this was the cure,, took about 5 days and the batter was so bad that it would not take a charge,,not to bore you anymore, if you find out what it is, I may go back and look again,, this has been about 2 yrs ago..Fred


Redryder pix
My Hotrod
A veteran - whether active duty, retired, national guard, or reserve - is someone who, at one point in his or her life, wrote a blank check made payable to The 'United States of America', for an amount of "up to and including my life."
I am fighting cancer and I am winning the fight | Pain is part of life; misery is an option.

#92381 07/19/2005 11:33 PM
Joined: Jun 2004
Posts: 8,597
W
Riding in the Passing Lane
Riding in the Passing Lane
W Offline
Joined: Jun 2004
Posts: 8,597
A slight draw on the battery is normal if it does not run the battery down over a long period of time. There is slight drain from dust, moisture, or other foreign material in the switches & battery case. A battery will have lower voltage after setting awhile because the surface voltage drains off. smile


They say money can't buy happiness. It can buy old Chevy trucks though. Same thing.
1972 Chevy c10 Cheyenne Super
In the Gallery Forum
#92382 07/20/2005 1:58 AM
Joined: Apr 2000
Posts: 499
R
'Bolter
'Bolter
R Offline
Joined: Apr 2000
Posts: 499
Quote
How do I check it?
Let me try this again. Take the wires off the alt. If the bat stops draining down overnight, you can conclude there is a relationship.


'67 GMC 3/4 292 4spd
#92383 07/20/2005 2:47 AM
Joined: Oct 2002
Posts: 4,066
Bolter
Bolter
Joined: Oct 2002
Posts: 4,066
I think the normal drain is less then 3MA..Fred


Redryder pix
My Hotrod
A veteran - whether active duty, retired, national guard, or reserve - is someone who, at one point in his or her life, wrote a blank check made payable to The 'United States of America', for an amount of "up to and including my life."
I am fighting cancer and I am winning the fight | Pain is part of life; misery is an option.

#92384 07/20/2005 3:15 PM
Joined: Mar 2005
Posts: 16
F
Junior Member
Junior Member
F Offline
Joined: Mar 2005
Posts: 16
thanks everyone....I will try the alternator AGAIN ! This has more than normal battery drain, over .6 volts overnight, and will be dead in a few days....NOT ACCEPTABLE!!
....it is broke, and I've got to fix it or I can't "just drive em".......

#92385 07/20/2005 8:06 PM
Joined: Jun 2005
Posts: 153
O
Member
Member
O Offline
Joined: Jun 2005
Posts: 153
frank, sounds like you're pretty capable, electrically speaking. If you find its not the alternator, and assuming you don't have a clock (or in internal one inside an aftermarket, modern type radio), alarm system or other obvious 'always hot' drain, check the cigarrette lighter and all light sockets and turn signal indicator for continuity that shouldn't be there (shorts) using a volt ohm meter (VOM).
tony


Overland Blue, 1953 GMC 1/2T, 100-22, 228/1bbl, 4sp/4.10 6v, shortbed/fender side/5-window.
#92386 07/21/2005 4:38 PM
Joined: Mar 2005
Posts: 1,513
C
'Bolter
'Bolter
C Offline
Joined: Mar 2005
Posts: 1,513
When I installed my new harness I had the same symptoms. I had wired my gas gauge to the wrong terminal on the ignition switch and the gauge was always on. Turn the key on and off while watching the gauge. Needle should jump with power.

Curt B.


1952 1300 Canadian 1/2 ton restomod
You Tube
#92387 07/22/2005 4:59 AM
Joined: Feb 2000
Posts: 987
B
'Bolter
'Bolter
B Offline
Joined: Feb 2000
Posts: 987
Frank you might try this (I have heard people use it to find shorts). Take some type of device like a seat belt warning buzzer and hook it up between the battery and the positive cable. As long as the drain is happening it will "buzz". Now just go through your fuses and pull one at a time. As soon as the bussing stops you have identified the ciruit that the "drain" is coming from. I have never tried this but is sounds good to me. Good luck and keep us posted.


Brian Moore
1949 3100 5 window Deluxe
"Today is better than yesterday, but not as good as tomorrow"
#92388 07/22/2005 4:00 PM
Joined: Mar 2005
Posts: 16
F
Junior Member
Junior Member
F Offline
Joined: Mar 2005
Posts: 16
thanks for all your suggestions, I have tried them all (with some variations) switched gas guage (key activated), don't have radio, clock, or alarm, etc. But I may disconnect lighter to see if that is problem. Disconnect switch will be installed soon, until I find the problem...Frank

#92389 07/23/2005 5:21 PM
Joined: Oct 2003
Posts: 5,152
O
Cruising in the Passing Lane
Cruising in the Passing Lane
O Offline
Joined: Oct 2003
Posts: 5,152
Frank do you have a ampmeter of some sort?

With the truck turned off just like you were going to leave it overnight. Disconnect the positive cable from the battery and measure the current flow. Start with a high range and then work down until you have an accurate measurement. That way you should be able to know exactly what you are loosing.

Then with the meter still connected, disconnect one electrical device at a time until one of them makes the current flow go away. That one is the problem.

Best to approach it with some sense of structure, perhaps pulling a fuse, and if nothing changes assume everything on that fuse is okay. Remember that some circuits are not fused on an old truck, and your problem may be something that doesn't have a fuse. To find those located each junction, like at the starter, and disconnect each wire while checking for the current flow to go away.

Before you buy and install a disconnect switch, have you tried disconnecting the battery overnight to see if that affects it? Could be a bad battery...

Where in the Seattle area are you? I'm in Kitsap county.


1955 1st GMC Suburban | 1954 GMC 250 trailer puller project | 1954 GMC 250 Hydra-Matic | 1954 Chevy 3100 . 1947 Chevy COE | and more...
It's true. I really don't do anything but browse the Internet looking for trouble...
#92390 07/31/2005 5:00 AM
Joined: Mar 2005
Posts: 17
H
New Guy
New Guy
H Offline
Joined: Mar 2005
Posts: 17
quick question - what engine? any aftermarket options? BIG question - does it have stock or HEI distributor? original or later steering column/ignition switch? original or later wiring?
when the engine is running, what is the voltage measured from the (+) battery post to frame ground?

#92391 08/04/2005 10:53 PM
Joined: Mar 2005
Posts: 16
F
Junior Member
Junior Member
F Offline
Joined: Mar 2005
Posts: 16
hey hotrod.. stock 283 stock dist no options stock steering col and replaced ignition switch all stock wires. will check on voltage when running, but will loose .6 volts overnight.

#92392 08/04/2005 11:57 PM
Joined: Jun 2005
Posts: 27
C
Wrench Fetcher
Wrench Fetcher
C Offline
Joined: Jun 2005
Posts: 27
could be some of the wiring insulation is breaking down allowing a partial short. will be difficult to find. Oldsub's suggestion of an ampmeter is a good one. moving wires with someone watching the meter you might get lucky. goodluck

#92393 08/05/2005 2:50 AM
Joined: Jul 2005
Posts: 226
F
Cruising in the Passing Lane
Cruising in the Passing Lane
F Offline
Joined: Jul 2005
Posts: 226
.6 volts overnight.??? from what to what..??? are you sure its a current draw..sucking it down...its normal for a batter to go from being charged to stitting to loose a little voltage... but that doesnt mean its gonna loose .6 accumulative every day...like ten days loose 6 volts... is that whats happening..??? or just the .6 volts one night..??? and is ur voltage meter right..???


What it will say on my Tombstone: "Boy, that guy sure owed alotta people Money"

Moderated by  Jon G, Rusty Rod 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0