| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,090 Posts1,056,024 Members48,432 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#88700 11/25/2001 3:21 AM | Joined: Mar 2000 Posts: 11 Member | | Member Joined: Mar 2000 Posts: 11 | sometime ago there was a posting about a couple of different sources for repairing the temp sending unit(gas)and upgrading the fuel guage on the a.d. trucks, does any one have the information? thanx, dave b | | |
#88701 11/25/2001 3:38 PM | Joined: Aug 2000 Posts: 346 Shop Shark | | Shop Shark Joined: Aug 2000 Posts: 346 |
'38 Chevy 1-1/2 ton
'49 Chevy 1/2 ton
'54 Chevy 6400 2 ton
'55.2 GMC 3/4 ton
'56 GMC 1-ton
No Room Left in Shop
| | |
#88702 11/27/2001 7:43 PM | Joined: Jan 2000 Posts: 124 Shop Shark | | Shop Shark Joined: Jan 2000 Posts: 124 | The best one I have found so far is Bob's Speedometer 800-592-9673 ask for Bruce. Tell then Randy from Fifth Avenue sent ya...good folks !! Randy  | | |
#88703 12/05/2001 1:35 PM | Joined: Feb 2000 Posts: 50 Member | | Member Joined: Feb 2000 Posts: 50 | I used American Classic for mine.
'52 Chevy 5 window, it ran when I parked it
'53 Chevy 5 window, running the streets with me.
'55 Massey-Ferguson, tearing up the dirt
'89 Harley FXSTS, suicide clutch
'92 Harley FLSTC, equal time with the '89
| | |
#88704 12/05/2001 5:29 PM | Joined: Mar 2000 Posts: 784 'Bolter | | 'Bolter Joined: Mar 2000 Posts: 784 | Dave, I can also recomend United speedometer they rebuilt the spedo on my 46 did an excellent job. I'm fortunate because they are right here in town.
Good Luck
George | | |
#88705 12/09/2001 2:48 AM | Joined: Mar 2000 Posts: 11 Member | | Member Joined: Mar 2000 Posts: 11 | thanx for the replies folks. as i finally have the fuel guage up and running i'm wondering if anything can be done for the temp guage beyond sending it out. the copper line shows no sign of damage and the needle is pegged. is there hope?  | | |
|
|
| |
