| |
Click on image for the lowdown. 
====
| | |
0 members (),
136
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,035 Posts1,055,560 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jun 2011 Posts: 124 Shop Shark | | Shop Shark Joined: Jun 2011 Posts: 124 | I have a 230 Inline 6 along with the original 4 speed transmission that I'll be installing back into a 65 C10 project. The bell housing cross member is off too. I'm thinking the best way is to:
1. Install bell housing cross member
2. Bolt Bell housing & clutch to motor.
3. Drop motor and bell housing in and bolt up
4. Install transmission last.
Please let me know if there's an easier way. Thanks.... | | | | | Joined: Dec 2008 Posts: 319 Shop Shark | | Shop Shark Joined: Dec 2008 Posts: 319 |
If you can't fix it with a hammer and screwdriver, you need a bigger hammer.1965 Chevy C10 | | | | | Joined: Jun 2004 Posts: 8,597 Riding in the Passing Lane | | Riding in the Passing Lane Joined: Jun 2004 Posts: 8,597 | Thats the way I would do it. I am going to put a small block v-8 in my 56 & thats the order im going to use although the crossmember will remain in it.
They say money can't buy happiness. It can buy old Chevy trucks though. Same thing. 1972 Chevy c10 Cheyenne SuperIn the Gallery Forum | | | | | Joined: May 2005 Posts: 487 'Bolter | | 'Bolter Joined: May 2005 Posts: 487 | That SM=420 trans is a heavy suckah. Search the archives for some clever ways people have devised to make reinstalling it easier.
regards,
Leon | | |
|
|
| |
