The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
9 - 11 Memorials

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
2 members (lumbersawyer, Peggy M), 66 guests, and 2 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,042
Posts1,055,602
Members48,426
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
#859612 06/16/2012 4:41 PM
Joined: Jan 2012
Posts: 10
5
New Guy
New Guy
5 Offline
Joined: Jan 2012
Posts: 10
I have a '63 half ton pick up, 3 speed on column with an inline 6 engine. Am in the process of taking apart repairing etc. the engine will run but stops periodically, like being gas starved.....I clean fuel line and it runs fine for a while....am going to take tank out and clean....my question is should the gas run out of the tank if the line is removed......mine does not......also
compressed air blown into tank does not help.....any help is appreciated.....Pat

Joined: Jun 2012
Posts: 9
R
New Guy
New Guy
R Offline
Joined: Jun 2012
Posts: 9
Pat,

I went through the same thing with mine. If the truck has sat for any length of time the tank is most likely rusted from condensation. The best fix is to replace the tank or you will fight the issue from now on. I purchased and installed a new tank, new fuel lines and reworked the original carb.

My tank cost 175 dollars....it was well worth it.

Red

63' C20 Stake Bed
http://s1164.photobucket.com/albums/q578/raptorsrule/




Joined: Sep 2011
Posts: 2,951
L
'Bolter
'Bolter
L Offline
Joined: Sep 2011
Posts: 2,951
A tank restoration kit from Eastwood or POR15 is an option if you have the time and don't mind working with chemicals like muriatic acid. I did a tank on my FORD and everything cost me about $70. Fairly easy to do but you have to be careful with the acid.

Joined: Jan 2012
Posts: 10
5
New Guy
New Guy
5 Offline
Joined: Jan 2012
Posts: 10
thanks for the replys....I pulled the sending unit from the top of the tank and the line attached had a metal filter that was all corroded and plugged.....after cleaning and replacing the engine runs fine.....am in process of cleaning the engine compartment next.....this really keeps my interest going......Pat

Joined: Sep 2011
Posts: 2,951
L
'Bolter
'Bolter
L Offline
Joined: Sep 2011
Posts: 2,951
Originally Posted by 503pat503
I pulled the sending unit from the top of the tank and the line attached had a metal filter that was all corroded and plugged.....

If the stuff plugging the metal filter was rust, then there is probably more rust in the tank, and I think it won't be long until you are facing the same problem again.

Last edited by Lugnutz; 06/18/2012 3:10 AM.

Moderated by  Hambone, Woogeroo 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0