| |
Click on image for the lowdown. 
====
| | |
7 members (JW51, Uncles51, Jaison, Wayne67vert, Johnny Rib, Robert Crandall, 1 invisible),
70
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,041 Posts1,055,481 Members48,424 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Sep 2011 Posts: 57 Wrench Fetcher | | Wrench Fetcher Joined: Sep 2011 Posts: 57 | I decided to put a carb kit in the old 46' because it was running rough. When I removed the Rochester carb I noticed a crack in the phenolic 5/8" riser.
I assume that this riser was installed to prevent vapor lock, like on my 50' Ford.
Are these thick gaskets available through NAPA, or some other parts distributor. Thank you. | | | | | Joined: Aug 2010 Posts: 255 'Bolter | | 'Bolter Joined: Aug 2010 Posts: 255 | The insulator plates are available from American Classic truck Parts for $10 - assuming you have a 216. Check 'em out - they are a good Stovebolt site sponsor. | | | | | Joined: Sep 2011 Posts: 57 Wrench Fetcher | | Wrench Fetcher Joined: Sep 2011 Posts: 57 | Thanks, I did find them after doing a little research. | | |
|
|
| |
