Click on image for the lowdown. 
====
| | | Forums66 Topics128,139 Posts1,056,758 Members48,454 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Nov 2009 Posts: 11 Riding in the Passing Lane | | Riding in the Passing Lane Joined: Nov 2009 Posts: 11 | Hi Folks-I hope I am not posting a previously answered question. Some 38 years ago I had new windshield glass and gasket put into my '51 half ton. The shop did an excellent job but no longer do glass work.It recently started leaking and I figured it was time to do it again,as the gasket was deteriorating and the glass had gotten all scratched up. The shop I took it to for the work put in an inferior quality gasket, and the gasket was not centered as it should be. I tried to straigten it out and just made it worse. Can anyone recommend a good vintage glass shop in the AL, GA, or TN area? Thanks,Tex the old stovebolter
what,me worry?
| | | | | Joined: Mar 2008 Posts: 3,750 'Bolter | | 'Bolter Joined: Mar 2008 Posts: 3,750 | Sorry I can't help with a good glass shop local to you Tex. Re: The replacement gasket,the general consensus is that Steele rubber products are by far the best quality,and AFAIK is made in the USA. Most of the aftermarket rubber is produced in the R.O.C.,my own included and it has deteriorated and split in less than 6 years. It hasn't even been on the road yet! Good luck with your search.
Last edited by jockbolter50; 03/13/2012 10:05 PM.
1950 Chevy Advance Design 3100 in ScotlandIn the Stovebolt GalleryMore pix on Flickr. I've definately got this truck thing in my blood ... my DNA sequence has torque settings"Of all the small nations of this earth,perhaps only the ancient Greeks surpass the Scots in their contribution to mankind" Winston Churchill.
| | | | | Joined: Oct 2007 Posts: 397 Shop Shark | | Shop Shark Joined: Oct 2007 Posts: 397 | Order the rubber seal from Steele Rubber Products in Denver, North Carolina. Jim Carter Truck Parts sells the glass.
"Lucille" ..... Proud Member of the "Southern Stovebolts" David Wolff 1946 Chevy 1/2-ton In the Gallery | | | | | Joined: Nov 2009 Posts: 11 Riding in the Passing Lane | | Riding in the Passing Lane Joined: Nov 2009 Posts: 11 | Hey guys,
Thanks for the tips. I may end up seeing who these folks reccomend doing the installation and take a little road trip to have the work done. I have done a fair amount of mechanical tinkering and painting on the old bomber over the years, but Murphy would definitely be around if I tried to replace window
gaskets. I get aggravated and frustrated with the old girl from
time to time and threaten to sell it, but it would be like losing
a long-time friend.
Thanks Again, Tex
what,me worry?
| | | | | Joined: Oct 2005 Posts: 116 Shop Shark | | Shop Shark Joined: Oct 2005 Posts: 116 | Tex , may I offer a suggestion ? I know Honest Charley's in Chattanooga doesn't do glass installation but they do deal with vintage vehicles on a daily basis . Besides running the speed shop , they also restore cars and trucks so " someone " does the window installation and likely it is a local shop that does so . Why not call them and ask who does the " window replacements " for them ! Likely it will be a shop that specializes in vintage installs as well as modern vehicle repairs . Homewood and Chattanooga aren't too far apart so you could make an appointment with this shop ( assuming you find out their name ) and next time you are passing through , have them do the replacement . Just my $0.02 !
" The heart of the wise inclines to the right , but the heart of the fool to the left " - Ecclesiastes 10:2
| | | | | Joined: Nov 2009 Posts: 11 Riding in the Passing Lane | | Riding in the Passing Lane Joined: Nov 2009 Posts: 11 | Hey Old Blue,
Thanks for the tip I have actually visited Honest Charley's while visiting Chattannoga and it seems to be a neat shop. Don't know why I didn't think of them as a resource.
Tex
what,me worry?
| | | | | Joined: Mar 2008 Posts: 3,750 'Bolter | | 'Bolter Joined: Mar 2008 Posts: 3,750 | Great advice from oldblu,Tex. I would much rather entrust my truck to a shop who specializes in old iron. Like he says,they will possibly have their own guy 'in-house' with the skills or at least use someone who can do the work. I'm fortunate as I work in the automotive glass trade so I can do this myself. So if mine's wrong there's only one guy I can blame!  The big national companies are more interested in quantity rather than quality. They seldom have the knowledge/skill or even interest in earlier vehicles.
1950 Chevy Advance Design 3100 in ScotlandIn the Stovebolt GalleryMore pix on Flickr. I've definately got this truck thing in my blood ... my DNA sequence has torque settings"Of all the small nations of this earth,perhaps only the ancient Greeks surpass the Scots in their contribution to mankind" Winston Churchill.
| | |
|
|
