| |
Click on image for the lowdown. 
====
| | |
0 members (),
123
guests, and
5
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,078 Posts1,056,035 Members48,433 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2009 Posts: 121 Shop Shark | | Shop Shark Joined: Apr 2009 Posts: 121 | a guy in my town has a 37 chevy suburban he is looking for the seats . are the seats the same as 40s suburbans ? i know the 50s are to big | | | | | Joined: Apr 2009 Posts: 121 Shop Shark | | Shop Shark Joined: Apr 2009 Posts: 121 | | | | | | Joined: Oct 2004 Posts: 1,780 Master Gabster | | Master Gabster Joined: Oct 2004 Posts: 1,780 | I am pretty sure they are the same size 1937/1940 and they may be similar to the 1941/1947 Suburbans. Here's a picture of a 1940 | | | | | Joined: Apr 2006 Posts: 62 Wrench Fetcher | | Wrench Fetcher Joined: Apr 2006 Posts: 62 | They should fit inside OK, but you will probably have to move the key-hole type of attachment on the floor. I have a '39 burb and used a set of seats from a '42 GMC, they fit well but since I was making new floor boards, it wasn't a problem to adjust the location of the seat to floor attachments.
Note: the part numbers for the '37's seats are not the same as the '40's.
Good Luck
Stan | | | | | Joined: Oct 2004 Posts: 1,780 Master Gabster | | Master Gabster Joined: Oct 2004 Posts: 1,780 | Stan, post some pictures of your seats and their installation. Thanks | | | | | Joined: Apr 2006 Posts: 62 Wrench Fetcher | | Wrench Fetcher Joined: Apr 2006 Posts: 62 | GMONIZ Since I have never posted pictures before, can you post them if I e-mail them to you? There are at least six pic'c showing the floor and seat frames in my workshop. Thanks Stan [email protected] | | |
|
|
| |
