The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
Help is a click away!

VEHICLE
INFORMATION
KITS


at the

GM Heritage Center
All the details are here.

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
4 members (66flea, 1955 1 Series, UtahYork, Deegs53), 311 guests, and 4 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,156
Posts1,057,018
Members48,460
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
Joined: Mar 2006
Posts: 21
R
New Guy
New Guy
R Offline
Joined: Mar 2006
Posts: 21
Does anyone know if a 57 Chevy 3100 truck can be towed with a tow dolly for a very long distance? Will the rear axle be ok? thanks

Joined: Jul 2001
Posts: 3,887
S
Cruising in the Passing Lane
Cruising in the Passing Lane
S Offline
Joined: Jul 2001
Posts: 3,887
if you can't trailer it, distance towing is best done with the driveshaft removed and brake shoes adjusted very loose or removed - and if it's been sitting for a long time in poor conditions, don't be surprised if a wheel bearing smokes or seizes wink

Bill


Moved over to the Passing Lane

"When we tug a single thing in nature we find it attached to the rest of the world" John Muir
"When we tug a single thing on an old truck, we find it falls off" me
Some TF series details & TF heater pics & Rust-a-holics Unanimous parking lot
Joined: Sep 2011
Posts: 1,459
B
'Bolter
'Bolter
B Offline
Joined: Sep 2011
Posts: 1,459
It's not the rear axle you need to be concerned with, it doesn't care whats makint it turn as long as it has lube in it. The transmissio is where the problem lies. Manual transmission gets its lube by the countershaft splash while rotating. When dingy towing (or coasting w/ engine off in neutral)the output shaft is the output shaft is spinning w/o lube. Pull the driveshaft.


BC
1960 Chevy C10 driver 261 T5 4.10 dana 44 power loc
1949 GMC 250 project in waiting
1960 C60 pasture art
Retired GM dealer tech. 1980 - 2022
Joined: Feb 2004
Posts: 29,869
H
Kettle Custodian (pot stirrer)
Kettle Custodian (pot stirrer)
H Offline
Joined: Feb 2004
Posts: 29,869
I'd suggest putting fresh lube in the rear axle- - - -not just checking the level. If there's water in it, it will be on the bottom, and the axle will appear to be overfilled with lube. Pull the driveshaft and loosen the brakes, as suggested above.
Jerry


"It is better to be silent and be thought a fool than to speak and eliminate all doubt!" - Abraham Lincoln
Cringe and wail in fear, Eloi- - - - -we Morlocks are on the hunt!
There is nothing noble in being superior to your fellow man; true nobility is being superior to your former self. - Ernest Hemingway
Love your enemies and drive 'em nuts!
Joined: Aug 2006
Posts: 486
J
'Bolter
'Bolter
J Offline
Joined: Aug 2006
Posts: 486
The manual with my tow dolly states that you should put the drive wheels on the dolly, which in the case of a rear wheel vehicle means you'll pull it backwards. You have to tie the steering wheel down. I haven't done it yet but that's what the manual says.


'64 swb stepside (gone)
'57 1 ton
'53 phone truck
'59 swb
'46 1 1/2 ton
'68 swb gmc
Joined: May 2006
Posts: 8,351
L
'Bolter
'Bolter
L Offline
Joined: May 2006
Posts: 8,351
You'll also need to be wary of the condition of the tires on the vehicle being towed. If they're old and dry rotted, they may not hold up.
If you can, getting a trailer to haul it would be the preferred method over using a dolly.


Bill Burmeister
Joined: Feb 2004
Posts: 29,869
H
Kettle Custodian (pot stirrer)
Kettle Custodian (pot stirrer)
H Offline
Joined: Feb 2004
Posts: 29,869
Towing with the steer axle on the ground can be exciting, especially if there's any looseness in the tie rods, king pins, etc. I've done it, but only for short distances and low speeds if there's any slack at all.
Jerry


"It is better to be silent and be thought a fool than to speak and eliminate all doubt!" - Abraham Lincoln
Cringe and wail in fear, Eloi- - - - -we Morlocks are on the hunt!
There is nothing noble in being superior to your fellow man; true nobility is being superior to your former self. - Ernest Hemingway
Love your enemies and drive 'em nuts!
Joined: Jun 2011
Posts: 1,901
C
Shop Shark
Shop Shark
C Offline
Joined: Jun 2011
Posts: 1,901
After draining and refilling the rear end I dropped the drive line and loaded up all my tools into the bed (lets just say it was full and leave it at that) loaded it onto a dolly from the U-place and drove from Fresno, Ca to Astoria, Or with no problems. I couldn't get a trailer because they said my G20 van wasn't big enough to handle it. (But a dolly was OK?)
I did check the front tie downs regularly as they tended to worked loose every hundred miles or so. The tires barely fit (as in they were hanging over the edges) but we cruised 65 to 70 up I5 all the way(900 miles).

I did make sure the tires and everything else were running nice and cool the first few miles and again when I was tightening the front tie downs but it was easy peasy and the guys I picked up hitch hiking couldn't believe we were actually towing it as effortless as it was. I don't think I'd try it backwards like the manual says. Nor would I try it on iffy tires (you don't want to ask me why)

Your experience may vary eeeek

Last edited by CASO; 12/03/2011 4:29 AM.

Give me ambiguity
or give me something else
Joined: May 2006
Posts: 8,351
L
'Bolter
'Bolter
L Offline
Joined: May 2006
Posts: 8,351
That seems odd to me, as when I went to rent a trailer to bring mine home from Marietta GA to Danville IL, we asked about a dolly to see if it would save any money. The U-Haul rep we talked to said that they were only recomended for use with FWD cars, and actually advised not to use one for a truck. The cost difference, the trailer was $10 less. The tow vehicle was an '88 K2500.


Bill Burmeister

Moderated by  Dusty53, SWEET 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0