| |
Click on image for the lowdown. 
====
| | |
9 members (farmallb, moparguy, Opelika Tom, mk72, Otto Skorzeny, Oswald, Hush, RoadsScholar, 1 invisible),
181
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,089 Posts1,055,988 Members48,430 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Nov 2011 Posts: 29 New Guy | | New Guy Joined: Nov 2011 Posts: 29 | Anybody got any suggestions for me here ? Above the windshield seal I've got some pretty bad rust. It's nearly the length of the windshield and clean thru. I'm not doing a frame-off resto, so it's not critical that it's perfect... I probably could fiberglass it but it seems hard to do based on the radius involved combined with the seal having to fit just right. Anybody ever dealt with this one before ?
Thanks, Troy
| | | | | Joined: Sep 2010 Posts: 72 New Guy | | New Guy Joined: Sep 2010 Posts: 72 | I've seen thsi before and it's a real difficult area to work with, especiall the size as you stated. The onl way to properl repair it is to replace the roof at the pillars. Just make sure whoever does it measures every opening 4x! I'm doing one now where the roof was replaced at a body shop and the door opening is now tight. | | | | | Joined: Nov 2011 Posts: 29 New Guy | | New Guy Joined: Nov 2011 Posts: 29 | Could I use body solder ? | | |
|
|
| |
