The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
Brrrr

Winter is Coming
Time to think about winterizing your Bolt.
A good Tech Tip
WINTERIZING YOUR TRUCK
including a link back to the Forums for additional tips.
Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
4 members (Woogeroo, klhansen, jay d, 1 invisible), 130 guests, and 2 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,288
Posts1,058,577
Members48,492
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
#794471 11/02/2011 3:52 AM
Joined: Oct 2011
Posts: 8
H
New Guy
New Guy
H Offline
Joined: Oct 2011
Posts: 8
Any one know where I can get some cheap hydrolic lifters for a full pressure chevy 235, it's a 1953. I've found them for $12 a piece. I just find it annoying that Summit sells a wide selection of lifters for $3 a piece, just not the size of the 235. They're pretty big in diameter, 0.989 in.

Joined: Oct 2006
Posts: 9,671
D
'Bolter
'Bolter
D Offline
Joined: Oct 2006
Posts: 9,671
It's not the size that matters guy, it's the volume of sales that drives the cost. Taint as
much demand for Stovebolt lifters like there is for the V8s.
Heck, you can put a whole SBC together for half the cost of a Stovebolt rebuild.
DG

Last edited by Denny Graham; 11/02/2011 10:39 AM.

Denny G
Sandwich, IL
Joined: Oct 2011
Posts: 8
H
New Guy
New Guy
H Offline
Joined: Oct 2011
Posts: 8
You're very right,I have a 235 that I was wanting to rebuild but the parts for it keep going up and up and up after more research. For some reason I though these were more common than they are.

I rebuilt a 350 about 10 years ago when I was just out of highschool for my Blazer. I think back then I spent 500 for all the machine work and a master engine rebuild kit. A master rebuild kit from Kanter, Egge, and others is well over $1,000 for a 235, just too rich for my blood.

So...did a little more research and have decided to go with a 1964-1975 Chevy 250. They have design upgrades and you can get parts at a very resonable price. Langstroms sells bolt in engine mounts for 150 and I'll have a modern style Chevy bellhousing bolt pattern. The Chevy 250s are starting to seem fairly plentiful to, by try and find a 292.


Moderated by  Phak1, Woogeroo 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0