please folks,i need your help once again,after a very long day of working on our 1954 pickup,we were trying to get our brake system working,we changed the master cyl,wheel cly,hoses,i myself did the 2 fronts and the right rear,my dad told me to take a break,he would install the left rear brake line, i say ok,now we are all ready to start bleeding the system,add the fluid,start pumping away at the pedal,then after 3 refills,my son yells out,grandpa theres all fluid pouring out the line he installed,so i run over to see whats going on,he had it completelty cross threaded,i said dad what did ya do,he tells me i could not see i did it by feel,ahhhhh,well anyway here is the problem,there is a fitting that mounts on the left rear wheel cylinder that is held on by a tapered bolt with a hole for the fluid to go threw,similar to the one that goes on the master cylinder,then the brake line then screws into that fitting,the fitting is shot,im i need of a new one,could you tell me where i might be able to buy one?i checked classic parts and lmc,any help,as always will be greatly appreciated,thanks again john
Last edited by jrsdart; 10/30/2011 9:41 PM.
