The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
Help is a click away!

VEHICLE
INFORMATION
KITS


at the

GM Heritage Center
All the details are here.

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
6 members (52Carl, Steelonsteel, Wally / Montana, Gray_Ghost, fonz8261, Stovebolt48), 87 guests, and 0 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,052
Posts1,055,770
Members48,426
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
#776087 08/29/2011 2:02 PM
Joined: Apr 2011
Posts: 106
S
Wrench Fetcher
Wrench Fetcher
S Offline
Joined: Apr 2011
Posts: 106
I've got a th350 in my '40, and after sitting all winter I had a giant puddle of tranny fluid all over the garage floor. It had a leak when I got it, but it wasn't too bad. I replaced the dipstick tube and o-ring, as well [censored] the pan gasket. But the leak persists and is getting worse. It's hard to tell exactly where it's coming from, because it seems like there is fluid everywhere on the bottom of the tranny, so it's been had to track it down. I took it out yesterday, and just backing out of the garage to the driveway left a steady line of fluid on the ground.

It looks like it might actually be coming out of the small hole at the bottom of the flywheel cover, but it's hard to tell because it seems to be getting everywhere, but I definitely saw a drop come out of that hole. I haven't removed the flywheel cover yet to see what it looks like, but anyone have any idea what I might be dealing with, if that is in fact where it is dripping out of?


1940 Chevy 1/2 ton, 12 volt, 350/350th
Joined: Apr 2005
Posts: 2,097
R
'Bolter
'Bolter
R Offline
Joined: Apr 2005
Posts: 2,097
It's not unusual for transmissions to leak after sitting for extended periods. The oil from the torque converter will seep into the trans find a way to leak out. It's usually the front pump seal if it's leaking in the area you indicated. Don't panic however, clean it up, drive it, and you may find it's OK.
Fred


1956 3100 Pickup/Red/350/3sp OD/PS/Disc Brakes
1957 Bel Air Sport Coupe/Red/355/TH350/PS/Disc Brakes
2017 Silverado LT Single Cab SB/Black/5.3/6 Speed Trans
1947 Willys CJ2A w/F-Head engine
rfs56trk #776292 08/29/2011 11:57 PM
Joined: Nov 2010
Posts: 304
P
Shop Shark
Shop Shark
P Offline
Joined: Nov 2010
Posts: 304
There are also o-rings on the speedo gear and the modulator. Inexpensive and easily fixed. I just learned that there is a vent near the top of the case on a turbo 400, bet the 350 has one also. Being clogged up will make fluid leak also-I am told. Makes sence-too much pressure.


'52 3100 "once a Marine, always a Marine!!

Moderated by  Dusty53, SWEET 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0