| |
Click on image for the lowdown. 
====
| | |
3 members (Bill Marlow, 2 invisible),
109
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,083 Posts1,055,967 Members48,430 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#77074 05/03/2007 7:14 PM | Joined: Mar 2005 Posts: 1,513 'Bolter | | 'Bolter Joined: Mar 2005 Posts: 1,513 | Has anybody tried these or had any experience with them? From what I can find opinions range from a waste of money to a decent boost in torque, hp, and mileage. A local FLAPS has a wall covered with these things and they sell quite brisk at a cost of $140 - $160. I took several out of the box and examined the pitch and form of the helix bore and I can duplicate it pretty easily. I’m going to make an aluminum pair and try them on my 235 in place of the regular spacers. I considered machining the helix down the throats of my Fenton intake but I think I’ll try the spacers first and go from there. I have a dyno appointment in 2 months so I’ll confirm results then. Comments/opinions are welcome and here’s a link to one of the types I looked at: http://www.airaid.com/spacers_learn_more.asp Curt B.
1952 1300 Canadian 1/2 ton restomod You Tube | | |
#77075 05/03/2007 9:07 PM | Joined: Sep 2003 Posts: 2,384 Shop Shark | | Shop Shark Joined: Sep 2003 Posts: 2,384 | A buddy put one on a TBI 350 engine in an 87 C10, it made a funny whistling noise at idle, he finally took it off. He said there was a little more throttle repsonse, but the funny noise bothered him. Brian | | |
#77076 05/03/2007 9:47 PM | Joined: Jul 2004 Posts: 5,708 'Bolter | | 'Bolter Joined: Jul 2004 Posts: 5,708 | Curt,
It will be interesting to see what the dyno figures are. When air/fuel mixtures are subjected to abrupt directional changes, like a 90° leg in a manifold or a mini cyclone like this spacer might induce, the fuel droplets can be thrown out of the air stream, being heavier than air. This can lead to decreased performance and other problems. I don't know if this is true but I remember reading it years ago.
Stuart | | |
|
|
| |
