| |
Click on image for the lowdown. 
====
| | |
0 members (),
140
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,080 Posts1,055,953 Members48,430 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2006 Posts: 46 New Guy | | New Guy Joined: Apr 2006 Posts: 46 | Any advice on ordering a clutch kit? I am not totally sure, but I think I have a Series 100-22, which calls for a 9 1/8" clutch size. The truck is a half-ton '53 GMC 228 inline 6.
Thanks all,
Craig
1953 GMC half-ton
| | | | | Joined: May 2001 Posts: 7,438 Extreme Gabster | | Extreme Gabster Joined: May 2001 Posts: 7,438 | I would check Rock Auto for it.
Yes, a half-ton '53 GMC 228 inline 6 is a 100-22. | | | | | Joined: Oct 2004 Posts: 1,780 Master Gabster | | Master Gabster Joined: Oct 2004 Posts: 1,780 | I just bought one for the 302 from NAPA, make sure you get the proper bearing for it too. The clutch kit comes with the bronze bearing that is ok to use on the chevy, not the GMC. BIGBADSWINGDADDY knows the part number needed. | | | | | Joined: Dec 2004 Posts: 1,897 Shop Shark | | Shop Shark Joined: Dec 2004 Posts: 1,897 | BCA 7109 is the pilot bearing you will need. | | |
|
|
| |
