| |
BUSY BOLTERS Are you one?  The Shop Area
continues to pull in the most views on the Stovebolt. In August alone there were over 22,000 views in those 13 forums.
| | Click on image for the lowdown. 
====
| | | Forums66 Topics126,777 Posts1,039,270 Members48,100 | | Most Online2,175
Jul 21st, 2025 | | | | Joined: Jan 2002 Posts: 2,254 'Bolter | | 'Bolter Joined: Jan 2002 Posts: 2,254 | Over the weekend I pulled the cab off the 48 so I could get to the frame. In examing the cab I found the rear drivers side to be bumped up and the outer skin loose.
I guess I will have to straighten the rear deck and attach the skin. I also noted the bottom of the skin has an indentation which needs to be reformed.
Has anyone run into this and do you have any advice?
TIA
Dennis
-there is nothing stronger than the heart of a volunteer-
| | | | | Joined: Sep 2007 Posts: 2,644 Shop Shark | | Shop Shark Joined: Sep 2007 Posts: 2,644 | | | | | | Joined: Jan 2002 Posts: 2,254 'Bolter | | 'Bolter Joined: Jan 2002 Posts: 2,254 | I need to open an account in one of the sites which is user friendly. Any suggestions?
Then I will start to link pictures.
Sorry.
Dennis
-there is nothing stronger than the heart of a volunteer-
| | | | | Joined: Sep 2006 Posts: 2,393 Shop Shark | | Shop Shark Joined: Sep 2006 Posts: 2,393 |
Drew
| | | | | Joined: Jan 2002 Posts: 2,254 'Bolter | | 'Bolter Joined: Jan 2002 Posts: 2,254 | I also think that if I can roll the cab on its back or front that I can do a better job of finishing the weld on the patch under the seat.
Dennis
-there is nothing stronger than the heart of a volunteer-
| | | | | Joined: Jan 2002 Posts: 2,254 'Bolter | | 'Bolter Joined: Jan 2002 Posts: 2,254 | Oh. And I have a webshots site. Looks like I need to move to photobucket.
Thanks
Dennis
-there is nothing stronger than the heart of a volunteer-
| | |
|
|
| |
